Skip to Content
  1. All products
  2. Energy
  3. TCP/IP 3 Phases kWh Via transformateurs de courant 5A ou 1A - MID - EMU Professional II 3/5 P21A000T
  4. Energy
Pricelist: Default Pricelist
Pricelist: Default Pricelist

TCP/IP 3 Phases kWh Via transformateurs de courant 5A ou 1A - MID - EMU Professional II 3/5 P21A000T

(0 review)
Three-phase electricity meter via current transformers with secondary current 5A or 1A with S0 pulse output and TCP/IP interface The EMU Professional II 3/5 TCP/IP is a 3-phase energy meter with MID approval and TCP/IP interface. Three-phase electricity meter via current transformers with secondary current 5A or 1A with S0 pulse output and TCP/IP interface. Electronic three-phase electricity meter for DIN rail mounting. Detection of active and reactive energy, power factor cos φ, consumption and production (import/export). MID B & D approved for billing purposes. Certified for PV systems according to DIN CLC / TR 50579: 2012. Suitable for energy management systems according to ISO50001. Fully compatible with the EMU Joulio-Web energy management system. 
345.00 € 345.00 € (Tax excluded)
345.00 € (Tax excluded)

Add to cart Buy now
Terms and conditions
Shipping: 2-3 working days
Contact Us

P21A000T EMU PROFESSIONAL II 3/5 TCP/IP MID ENERGY METER via Current Transformers

De EMU Professional II 3/5 TCP/IP is een 3-fasen energiemeter met MID-goedkeuring en TCP/IP-interface .

The TCP/IP communication interface of the 3-phase energy meter EMU Professional II is a Modbus TCP interface including API, protected against contamination and manipulation.

Protection against tampering with a sealable connection cover.

  • Two-way communication
  • TCP/IP Interface
  • Current measurement via current transformers with secondary 1 or 5 A.
  • Electronic three-phase electricity meter for DIN rail mounting. Detection of active and reactive energy, power factor cos φ, consumption and production (import/export).
  • MID B & D approved for billing purposes.
  • Certified for PV systems according to DIN CLC / TR 50579: 2012.
  • Suitable for energy management systems according to ISO50001.
  • Fully compatible with the EMU Joulio-Web energy management system.
  • 3x230/400VAC, 5A, 50Hz
  • Integrated tamper detection. Recording and archiving of configuration changes.
  • Protection against tampering with a sealable connection cover.


Product properties


EMU ENERGY MANAGEMENT - BILLING

Connection diagram

Dimensions

TCP/IP Energy Meter Configuration

Once the EMU Professional II TCP/IP is connected to your network via an Ethernet cable, you can access it via a web browser. Go to your meter at the following address: 

http://[IP address of the meter]/

You can find the IP address under "Settings" > "IP address"

This will take you to the web interface of the device for further configuration. 

Measurements on the LoRa electricity meter

- Active power (kW)

- Reactive power (kvar)

- Apparent power (kVA)

- Current (A)

- Consumption of active energy (kWh) and delivery (kWh)

- Reactive energy consumption (kvarh) and delivery (kvarh)

- Frequency (Hz)

- Number of power interruptions

S0 pulse output

In addition to the LoRa radio interface, the EMU Professional II energy meter has a configurable S0 pulse output.

- Active energy consumption or active energy supply

- Reactive energy consumption or reactive energy supply

Factory configuration with direct connection: 1,000 pulses/ kWh, 40 ms

Rate Control

 Tariff switching occurs by connecting 230VAC to the corresponding terminal.

0 = no voltage; 1 = 230VAC,


EMU Professional II Datasheet




Emu Professional II Q S G




EMU Professional II TCP/IP Manual




EMU Professional II Manual



View next Use Cases


Energy Monitoring Meet@4 Aalst