HSC-104-2000-I Open Loop HALL EFFECT Current Transformer 2000 A / 4-20mA

HALL EFFECT Open Loop AC/DC Current Transformers
QI-HSC2000
Pass-through opening 1040x360 mm According to the HALL effect principle
The HSCT sensors are used for all applications where direct current and variable frequencies (up to 20 kHz) need to be measured. For example, for battery monitoring systems (energy storage, UPS, emergency power supplies), speed controllers, power supplies for radio stations, power electronics, etc.
The output signals can be connected to special instruments, PLCs, etc.

By using the open-loop Hall effect measurement technique, they can be used with a core that can be opened, allowing the sensors to be easily installed without disconnecting the conductors. Removable screw terminals make installation extremely convenient.

GENERAL TECHNICAL SPECIFICATIONS 
Auxiliary power supply: 24 V dc (+/-5%)
Operating frequency: from DC to 20 kHz
Load resistance: minimum 500 Ohm
Current output at nominal current Ip = 0: 4 mA
Current output at nominal current Ipn: 20 mA ±1%
Measurement accuracy: 1%
Linearity: <1%
Thermal deviation of the measurement: ± 0.001mA/°C
Response time 0...90%: <50 ms
Isolation between primary and secondary: 5 kV
Operating temperature: -25°C...85°C
Storage temperature: -40°C...125°C
Connections: Removable terminal for cable cross-section 0.2 ÷ 2.5 mm2
Weight: 960 g